| View Article |
Design and impedance modeling for rectangular slot Frequency Selective Surface (FSS) on glass
F. A. Hussin1, B. H. Ahmad2, M. Z. A. A. Aziz3, N. S. A. S. Ali4, M. K. Suaidi5.
This paper presents a square patch with rectangular slot frequency selective surface (FSS) on energy saving glass (ESG). In this paper, there are two designs that have been presented, namely Design A which is a square patch with rectangular slot; and Design B which is a square patch with rectangular slot using complementary techniques. The unit cell of Design A and Design B are simulated using CST Microwave Studio software at 1.8 GHz and 5.2 GHz. The simulation process is based on the characteristics of the reflection coefficient (S11) and transmission coefficient (S21) of the FSS. Design A resonates at a frequency of 1.8 GHz. Design B resonates at two frequencies, 1.8 GHz and 5.2 GHz.
Affiliation:
- Universiti Teknikal Malaysia Melaka, Malaysia
- Universiti Teknikal Malaysia Melaka, Malaysia
- Universiti Teknikal Malaysia Melaka, Malaysia
- Universiti Teknikal Malaysia Melaka, Malaysia
- Universiti Teknikal Malaysia Melaka, Malaysia
Download this article (This article has been downloaded 80 time(s))
|
|
| Indexation |
| Indexed by |
MyJurnal (2019) |
| H-Index
|
0 |
| Immediacy Index
|
0.000 |
| Rank |
0 |
| Indexed by |
Scopus (SCImago Journal Rankings 2016) |
| Impact Factor
|
0 |
| Rank |
Q4 (Computer Networks and Communications)
Q4 (Electrical and Electronic Engineering)
Q4 (Hardware and Architecture) |
| Additional Information |
0.112 (SJR) |
|
|
|
